New Vent
Hole for a new vent that will allow dry air to flow freely in the basement.
Installing a New Vent
Securing the new vent into place.
Clean New Vent
The vent looks great when fully in place.
Holes For Ducts
These holes are drilled in the wall as a connection for the ducts the SaniDry will need.
Another View of Duct Holes
A picture of the duct holes from the room where the SaniDry will eventually be installed.
Insulation
The duct holes are insulated.
Connecting the SaniDry
The duct for the SaniDry is connected to the holes, which will be covered by a vent on the other side.
SaniDry Installed
The SaniDry as it looks fully installed.
Duct Work
The duct connects the dehumidifier to the holes in the wall shown earlier.
Cutting the Second Vent
The crew cuts open a vent space for the second SaniDry.
SaniDry Closeup
Closeup of the dehumidifier while the vent hole is being cut.
Aligning Through the Wall
Another crew member levels the vent hole on the other side of the wall.
Before Shot
Shot of one of the basement walls before the installation starts.